Follow this link to skip to the main content

The Spacecraft

Some scientific instruments on the Galileo spacecraft observe from a distance while others measure fields and particles directly. The Galileo probe was dropped right into Jupiter's cloudtops to collect data about the atmosphere.

At launch, the spacecraft and probe together had a mass of almost six-thousand pounds, about as much as two sport utility vehicles. Galileo is over twenty feet tall.

The spacecraft is a "dual-spin" design --- a controlled spin keeps Galileo stable. One section of the spacecraft rotates at 3rpm. On this section, six instruments rapidly gather data from many different directions. The other section of the spacecraft holds steady for the four instruments that must point accurately while Galileo is flying through space.

The 700-pound probe measured about four feet across. Inside the heat shield, the scientific instruments were protected from ferocious heat during entry. The probe had to withstand extreme heat and pressure on its high-speed journey at one-hundred-six-thousand miles per hour.

The Jet Propulsion Laboratory built the Galileo Spacecraft and manages the Galileo mission for NASA. Germany supplied the propulsion module. NASA's Ames Research Center managed the probe, which was built by Hughes Aircraft Company.

Click on the image to view a detailed drawing of the Galileo Spacecraft
Click on the image to view a detailed drawing of the Galileo Spacecraft

Next: Spacecraft Basics Next

Mission Operations