29 Sep 2004
(Source: NASA Headquarters)
September 29, 2004
John Ira Petty
Johnson Space Center, Houston
MARS DRILL WILL SEEK KNOWLEDGE & RESOURCES
It will be drilling for information first, then for resources, though oil is not likely to be among exploration targets.
The futuristic drilling rig, under development at NASA's Johnson Space Center (JSC), Houston, is designed for use on the moon or on Mars. It is being tested, in conditions in some ways similar to Mars, through Oct. 3, at the Eureka Weather Station.
The station is on Ellesmere Island in Canada's Artic Nunayut province about 690 miles from the North Pole. Jeffrey A. George is manager of the Mars Drill Project at JSC. The Canadian tests are being done in cooperation with NASA's Ames Research Center (ARC), Calif., and with faculty members from two Canadian institutions, McGill University in Montreal and the University of Toronto. Baker Hughes Inc. of Houston, a company with a rich oil field history, is participating in the project under a Space Act Agreement with NASA.
Setup exercises with the drill were held recently at JSC. Because it is designed for use on other planetary bodies, the drill has weight, size and power consumption limits, said project engineer Brian Derkowski. Power consumption is about 100 watts, enough to illuminate a bright household light bulb. Drill components are designed for minimum weight and size.
Because of weight and volume constraints, it cannot, like traditional drilling rigs, use drill pipe or drilling mud. The apparatus consists of a power source, a control box and the drill itself. The drill looks like a vertical pipe mounted on a support in the bottom of half a suitcase. A laptop computer is attached to the control box to record data.
The base is anchored to the surface and an electrically powered bit rotates beneath it. The pipe-like drill module follows the bit down. The drill is periodically pulled to the surface by its tether to remove the core and cuttings.
"This is the second generation of the drill," George said. "Initially the drill will be used to secure core samples for scientific study. Later versions eventually would drill for resources, like, possibly, subsurface water on Mars. We believe the third or fourth generation will be ready for the moon or Mars. "It should ultimately be able to drill to depths of several hundred meters," he said.
At Eureka, the drill is being used on sandstone and rock outcrops, and to drill through ice. Canadian geologists will study retrieved core samples to better understand the geology and biology of the high Arctic. The JSC team is relatively small with four members at Eureka. But, George said, it has gotten considerable support from other organizations at JSC, ARC and Baker Hughes. George believes the concept shows considerable promise. "It is a unique technology," he said.
For still images of the drill setup exercises at JSC on the Internet, visit:
Video of the JSC set up exercises is running today on NASA TV available in the continental U.S. on AMC-6, Transponder 9C, C-Band, at 72 degrees west longitude. The frequency is 3880.0 MHz. Polarization is vertical, and audio is monaural at 6.80 MHz.
In Alaska and Hawaii, NASA TV is available on AMC-7, Transponder 18C, C-Band, at 137 degrees west longitude. Frequency is 4060.0 MHz. Polarization is vertical, and audio is monaural at 6.80 MHz. NASA TV is available on the Internet at: http://www.nasa.gov/ntv
For information about NASA and agency programs on the Internet, visit: http://www.nasa.gov