National Aeronautics and Space Administration Logo
Follow this link to skip to the main content NASA Banner
Solar System Exploration
News & Events
Swapping Motion-Sensing Units
Swapping Motion-Sensing Units
12 Aug 2013
(Source: NASA/JPL)

This artist's concept of the Mars Reconnaissance Orbiter.
This artist's concept of the Mars Reconnaissance Orbiter.

Update: 14 Aug. 2013 (10:25 a.m. PST) -- The Mars Reconnaissance Orbiter is now using its Inertial Measurement Unit 2 and has resumed normal relay operations and science observations.


Mission Status Report

PASADENA, Calif. -- NASA's Mars Reconnaissance Orbiter is switching from one motion-sensing device to a duplicate unit onboard.

The veteran orbiter relies on this inertial measurement unit (IMU) for information about changes in orientation. This information is important for maintaining spacecraft attitude and for pointing the orbiter's large antenna and science-observation instruments.

The spacecraft has two identical copies of this motion-sensing device, called IMU-1 and IMU-2. Either of them can be used with either of the spacecraft's redundant main computers. Each contains three gyroscopes and three accelerometers.

"The reason we're doing this is that one of the gyroscopes on IMU-1 is approaching its end of life, so we want to swap to our redundant unit early enough that we still have some useful life preserved in the first unit," said Mars Reconnaissance Orbiter Mission Manager Reid Thomas of NASA's Jet Propulsion Laboratory, Pasadena, Calif.

The orbiter began investigating Mars in 2006. Since completing its primary science phase in 2008, it has continued to work as an extended mission.

The swap has been planned for this week, with procedures expected to take less than two days before the orbiter resumes its normal functions of science observations from orbit and communication relay for Mars rovers.

"To make sure we have a smooth transition, regaining attitude knowledge as quickly as possible, we will power off all instruments, do the IMU swap, maneuver to sun point, do the IMU swap, and then put the spacecraft into safe mode," Thomas said. "The safe-mode process re-initializes the spacecraft's knowledge of its attitude."

IMU-2 has been used previously, but IMU-1 has been used much more. After the swap, IMU-1 will remain available if needed for short periods.

The Mars Reconnaissance Orbiter has provided more data about Mars than all other earlier and current missions combined. It also relays to Earth information from both of NASA's active Mars rovers, Opportunity and Curiosity, sharing that function with the NASA Mars Odyssey orbiter.

JPL, a division of the California Institute of Technology in Pasadena, manages the Mars Reconnaissance Orbiter for NASA's Science Mission Directorate, Washington. Lockheed Martin Space Systems, Denver, built the orbiter and partners in its daily operation.

More information about the Mars Reconnaissance Orbiter is available online at http://mars.jpl.nasa.gov/mro/.


Guy Webster 818-354-6278
Jet Propulsion Laboratory, Pasadena, Calif.
guy.webster@jpl.nasa.gov
2013-245

News Archive Search  Go!
Show  results per page
 
 
Awards and Recognition   Solar System Exploration Roadmap   Contact Us   Site Map   Print This Page
NASA Official: Kristen Erickson
Advisory: Dr. James Green, Director of Planetary Science
Outreach Manager: Alice Wessen
Curator/Editor: Phil Davis
Science Writer: Autumn Burdick
Producer: Greg Baerg
Webmaster: David Martin
> NASA Science Mission Directorate
> Budgets, Strategic Plans and Accountability Reports
> Equal Employment Opportunity Data
   Posted Pursuant to the No Fear Act
> Information-Dissemination Policies and Inventories
> Freedom of Information Act
> Privacy Policy & Important Notices
> Inspector General Hotline
> Office of the Inspector General
> NASA Communications Policy
> USA.gov
> ExpectMore.gov
> NASA Advisory Council
> Open Government at NASA
Last Updated: 14 Aug 2013