National Aeronautics and Space Administration Logo
Follow this link to skip to the main content NASA Banner
Solar System Exploration
Multimedia
Mars Odyssey Launch
Mars Odyssey Launch (click to enlarge)
 
 

Mars Odyssey Launch
Date: 7 Apr 2001

Odyssey launched on Boeing's Delta II 7925 that uses nine strap-on solid rocket motors. Each of the nine solid rocket motors is 1 meter (3.28 feet) in diameter and 13 meters (42.6 feet) long; each contains 11,765 kilograms (25,937 pounds) of hydroxyl-terminated polybutadiene (HTPB) propellant and provides an average thrust of 485,458 newtons at liftoff. The casings on the solid rocket motors are made of lightweight graphite epoxy.


The main body of the first stage houses the Rock LR101-NA-11 vernier engines. The vernier engines provide roll control during main engine burn and attitude control after main engine cutoff before the second stage separation. The RS-27 main engine is a single start, liquid bipropellant load that carries 96,000 kilograms (211,000 pounds) of RP-1 (rocket propellant 1, a highly refined form of kerosene) as its fuel and liquid oxygen as an oxidizer.


The second stage is 2.4 meters (8 feet) in diameter and 6 meters (19.7 feet) long, and is powered by a AJ10-118K engine. The propellant is 6000 kilograms (13,228 pounds) of Aerozine 50 fuel, a 50/50 mixture of hydrazine and unsymmetric dimethly hydrazine and nitrogen tetroxide as the oxidizer. The engine is restartable and will perform two separate burns during the launch.


The third and final stage of the Delta II 7925 will provide the final velocity required to place Odyssey on a trajectory to Mars. This upper stage, called a PAM-D, consists of a spin table to support, rotate and stabilize the spacecraft/PAM-D combination before separating from the second stage, a Star-48B solid rocket motor for propulsion, and active nutation control system to provide stability after ignition of the PAM-D motor, a payload attach fitting to mount the spacecraft to the Star 48B motor and a yo-yo despin system designed to decrease the spin rate of the spacecraft/PAM-D combination stack prior to spacecraft separation.


During launch and ascent through Earth's atmosphere, the spacecraft PAM-D upper stage combination is protected from aerodynamic forces by a 2.9 meter (9.5 foot) diameter payload fairing, that is jettisoned from the launch vehicle during second stage powered flight at an average altitude of 131 kilometers (81 miles).

Credit: NASA/JPL



Awards and Recognition   Solar System Exploration Roadmap   Contact Us   Site Map   Print This Page
NASA Official: Kristen Erickson
Advisory: Dr. James Green, Director of Planetary Science
Outreach Manager: Alice Wessen
Curator/Editor: Phil Davis
Science Writer: Autumn Burdick
Producer: Greg Baerg
Webmaster: David Martin
> NASA Science Mission Directorate
> Budgets, Strategic Plans and Accountability Reports
> Equal Employment Opportunity Data
   Posted Pursuant to the No Fear Act
> Information-Dissemination Policies and Inventories
> Freedom of Information Act
> Privacy Policy & Important Notices
> Inspector General Hotline
> Office of the Inspector General
> NASA Communications Policy
> USA.gov
> ExpectMore.gov
> NASA Advisory Council
> Open Government at NASA
Last Updated: 13 Feb 2014